Congratulations on your purchase of the Raven RPR 100
G
GPS Receiver. This compact, all in one
unit, will provide you with the ability to log data and provide speed to your Raven controller. Setup
is fast and easy and can have you in the field within a half hour, in most cases. This simple document
will assist you in installing your 100
G
.
NOTE:
This receiver should not be used for steering systems since it is only a 4 Hz receiver.
Installation Steps:
1)
Unpack the components from your
box. Verify that you have the receiver
unit
(
P/N 063-0172-
590
)
and the cable
(
P/N 115-0171-350
)
.
2)
Attach the cable to the
receiver.
3)
Locate a metal surface on the vehicle that is toward the center and in clear view of the
sky. Place the receiver on that surface.
4)
Connect the power and ground wires: red to +12 VDC and black to ground.
NOTE:
Raven
recommend
s
attach
ing
these directly to a battery to eliminate signal noise issue
s.
016-0
171-002
08/05
SHEET 2 of 5
For safety purposes, an inline fuse is recommended.