![background image](http://html.mh-extra.com/html/raven/new-holland-autoboom-xrt/new-holland-autoboom-xrt_calibration-and-operation-manual_788931018.webp)
C
HAPTER
3
12
New Holland AutoBoom XRT Calibration & Operation Manual
AUTOFOLD OPERATION
NOTE:
Ensure the machine propulsion lever is in the neutral position. AutoFold is disabled if the machine
propulsion lever is not in neutral.
AUTOFOLD OUT TO SPRAY POSITION
1. Press and hold the brake pedal.
2. Tap the AutoFold button on the armrest. The button color should change to amber.
FIGURE 8. AutoFold Button on Armrest
NOTE:
The amber color indicates that AutoFold is trying to unfold to spray position.
3. Release the AutoFold button but continue to hold the brake pedal for the duration of the unfold cycle.
NOTE:
Release the brake pedal at any time to abort the AutoFold cycle.
AUTOFOLD IN TO TRANSPORT POSITION
1. Press and hold the brake pedal.
2. Press and hold the AutoFold button on the armrest for approximately 2 seconds until the button color changes
to green.
Amber = Unfolding
Summary of Contents for New Holland AutoBoom XRT
