Raven CaseIH 2100 Series, Supplement Installation Manual

Page: 10 / 20

CaseIH 2100-2300 Series Combine SmarTrax Installation Manual
8
Installing the
Tank Port
Hose
Route new hoses up from the steering assist valve, between cab and support
plate, and then forward toward the steering orbital through the existing hole in
the cab support. (This will follow existing hose routing to the orbital.)
1. Remove the existing tank to orbital hose at the orbital and attach a
provided 13/16” tee fitting to the orbital.
2. Re-connect hose to the tee fitting.
3. Connect one end of the tank hose to the tee and one end to the “T”
port on the steering assist valve.
Helpful Hint: You may wish to install an elbow fitting on the
orbital or on the steering assist valve to properly route the hose.
Installing the
A-Port to Left
Steer Hose
1. Remove the existing left steer hose at the orbital and attach a provided
13/16” tee fitting to the orbital
2. Re-connect hose to the tee fitting.
3. Connect one end of the “A to left steer” hose to the tee and the other end
to the “A” port on the steering assist valve.
Helpful Hint: You may wish to install an elbow fitting on the
orbital or on the steering assist valve to properly route the hose.