manualshive.com logo in svg

Raven Case IH Patriot 3XX0, Guidance And Steering Installation Manual

Share
Download
Raven Case IH Patriot 3XX0 Guidance And Steering Installation Manual Download Page 20

C

HAPTER

 3

16

Case IH Patriot 3XX0, Model Year 2010-2016 RS1™ HDU Guidance and Steering Installation Manual

INSTALL THE LEFT AND RIGHT STEERING HOSES

1. Locate and disconnect the machine’s left steering hose from the left steering cylinder.

NOTE:

The left steering hose is connected to the fitting located closest to the center of the machine.

2. Route and connect the left steering hose to the Port A2 of the installed flow switch (P/N 334-0003-085).

FIGURE 8. Installed Left Steering Hose

3. Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) on the open steering cylinder port.
4. Install the straight end of the supplied hydraulic hose (P/N 214-1000-672) on the opposite end of the installed 

tee fitting.

5. Connect the other end of the installed hydraulic hose to the fitting installed in Port B3 of the installed flow 

switch.

6. Install the 90° end of the supplied hydraulic hose (P/N 214-1000-671) on the 90° end of the installed tee fitting.
7. Connect the straight end of the installed hydraulic hose to Port A of the steering valve.

FIGURE 9. Installed Right Steering Hose

8. Locate and disconnect the machine’s right steering hose from the right steering cylinder.
9. Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) in the open steering cylinder port. 
10. Connect the machine’s right steering hose to the opposite end of the installed tee fitting.
11. Install the 90° end of the supplied hydraulic hose (P/N 214-1000-671) on the 90° end of the installed tee fitting.
12. Connect the straight end of the installed hydraulic hose to Port B of the steering valve (P/N 334-0003-088).

Right 

Steering 

Hose

Left 

Steering 

Hose

Summary of Contents for Case IH Patriot 3XX0











































Reviews:

No comments

Brands by name

Popular brands

Load more brands