Raven AutoBoom, Installation Manual

Page: 39 / 92

4
Manual No. 016-0230-004 Rev. F 33
PowerGlide Plus
Mount the AutoBoom Valve
FIGURE 8.
AutoBoom Valve Mounted on the Mounting Plate
1.
Secure the AutoBoom valve (P/N 063-0131-124) to the mounting bracket (P/N 107-0171-676) using four
5/16”-18 x 7/8” hex bolts (P/N 311-0052-104) and four 5/16” zinc plated lock washers (P/N 313-1000-019).
FIGURE 9.
AutoBoom Valve Mounted on the Machine
2.
Secure the mounting bracket to the machine’s center rack using the machine’s bolts and four 5/16”-18 zinc
flanged lock nuts (P/N 312-1001-169).
Install the Pressure and Tank Hoses - Newer Hydraulic Valves
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic
fluid within the machine’s system may be
extremely hot and under high pressure.