RoGator 54 Series 1997+ Autoboom Installation Manual
4
Hydraulic Safety Precautions
When disconnecting or purging hydraulic hoses, be aware that the
hydraulic oil within the machine system may be extremely hot and under
high pressure. Caution must be exercised. Any work carried out on the
hydraulic system must be performed in accordance with the equipment
manufacturer’s approved maintenance instructions. Raven industries
recommends that appropriate protective equipment be worn when working
on the hydraulic system.
Objects or materials that are able to bypass the machine’s hydraulic
filtration system will adversely reduce performance and possibly damage
the Autoboom hydraulic valves.
Electrical Safety Precautions
Do not reverse the power leads. Doing so will cause severe damage to
equipment. Always check that the power leads are connected to the correct
polarity as marked and ensure that the power cable is the last cable to be
connected.
Driving Safety
Requirements
This section outlines the safety requirements used when driving a vehicle
using the Autoboom system.
Areas of Operation
The Autoboom system must only be used on private property without
public access. It must only be used within cleared fields and must not be
used when traveling on any public roads or access ways. Raven Industries
advises that users familiarize themselves with Autoboom operation by first
reading the Autoboom Installation Manual and the PowerGlide,
PowerGlide Plus, or UltraGlide Calibration and Operator’s Manual.
Bystander Safety
Autoboom must not be operated in the vicinity of people. Bystanders must
be well outside of the machine’s path while Autoboom is enabled.
Important:
Sprayer hydraulics are under pressure. Never
attempt to open or work on a hydraulic system with the
equipment running. Care should always be taken when
opening a system that has been pressurized.
Important:
When installing Autoboom hydraulics or
performing diagnostics, maintenance, or routine service,
ensure precautions are taken to prevent any foreign
material or contaminants from being introduced into the
machine’s hydraulic system.
Summary of Contents for AutoBoom Rogator 54 Series 1997+
