Manual No. 016-0230-012
57
UltraGlide
Install the Pressure and Tank Hoses
1.
Locate and disconnect the pressure hose from the right side of the machine’s stack valve.
Note:
This should be the port labeled ‘P’(IN). If you cannot determine which line is the pressure line,
trace back each line until you find the line that connects to the hydraulic pump. That is the
pressure line.
2.
Install a tee fitting (P/N 333-0012-065) to the pressure port on the machine’s valve.
3.
Connect the machine’s pressure hose to the installed tee fitting.
FIGURE 3.
Pressure and Tank Lines teed off of Machine Valve
4.
Connect the straight fitting on the hydraulic hose (P/N 214-1000-317) to the installed tee fitting.
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or
purging hydraulic hoses, be aware that the
hydraulic oil within the machine system may
be extremely hot and under high pressure.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or
routine service, ensure precautions are
taken to prevent any foreign material or
contaminants from being introduced in the
machine’s hydraulic system.
Objects or materials that are able to bypass
the machine’s hydraulic filtration system
will adversely reduce performance and
possibly damage the AutoBoom hydraulic
valves.
Pressure and Tank
lines teed off of
machine valve
Summary of Contents for AutoBoom John Deere 4700
