Raven 500S Manual Download Page 3

Page: 3 / 7

Go to the System Information tab and then set the dropdown to GPS Receiver to see the receiver serial number.

ORDERING UNLOCKS

Go to the

to order Satellite GS and GS-Lite unlocks for the 500S™. You must be registered before

you can make purchases on the portal. Request an account by using the

link at the top of the page. When

ordering an unlock, the “ESN” will be the serial number you gathered in the previous steps.

NOTE ON SERIAL NUMBERS

If the serial number for your 500S™ is 19423186 or lower, you will receive a 56-digit code in addition to the standard 10-

digit code. The 56-digit code is a one-time-use code that will enable your 500S™ to use 10-digit codes in the future.

Should you ever need to order another Satellite GS subscription in the future, you will not need to enter another 56-digit

code.

ENTERING AUTHORIZATION CODES

You can enter 500S™ authorization codes using either a CR7™ or an SC1™.

NOTE ON CODE STRUCTURE

Authorization codes for the 500S™ must be entered exactly as they appear. They may contain any combination of upper

and lower-case letters, numbers, and special characters. It is very important that you enter these codes correctly.

USING THE CR7™

Go to the Settings menu

and then navigate to Software Update.

Summary of Contents for 500S







