Ravelli APLT2, Manual, Page: 4 / 6

Using the Tripod
Initial Set Up
To begin using the tripod, open the carrying bag using the zipper and pull the
tripod out of protective bag.
Height Adjustment
Adjusting the height of the APLT2 is done by snapping open the black leg
locks (G), extending the legs down to the desired height, and then snapping close
the leg locks. For additional height, turn the center column knob (F) counter
clockwise to loosen and pull up the center column to reach more height. Lock the
center column by turning counter clockwise to prevent it from retracting down.
(Note: When adjusting height, try to extend the thicker leg segment, as they are
thicker and provide greater stability.)
Mounting Your Camera
To secure the camera to the tripod plate, match the ¼” screw on the tripod
to the mounting screw hole on the bottom of your camera. Turn the knob clockwise
to secure the camera.
Note: It may be easier to mount the camera with the
tripod head in portrait orientation.
Panning & Tilting
Tilting - To control the resistance of the tilt, turn the handle (E) clockwise for
greater resistance or counter clockwise for less resistance to easily tilt up and
down.
Panning - For smooth consistent panning, tighten or loosen the panning
adjustment knob (D) until the right amount of resistance is obtained. Turning the
knob clockwise will tighten it and make panning slow and firmer. Turning the knob
counter-clockwise to loosen it will make panning fast and easy.
( Note : Finding the right amount of panning resistance will give you smooth and
optimal speed for great captures. We also recommend the use of sand bags to
provide greater stability when panning.)
Care & Maintenance
Clean the tripod with a damp clean cloth.