center column shaft hole. You may have to rotate the column
until you feel the tab align properly with the center column
indention. Adjust the shaft until the right height is achieved
then retighten the center column height adjustment knob to
secure. You may reattach the accessory hook on the top to
prevent loss. Reverse the process to use the tripod in the
normal operating position.
Second method- For the second method, start by
loosening the center column height adjustment knob and pull
up on the center column until it is fully extended then tighten
the knob to secure it in place. Next, invert the legs by pressing
in the grey button leg locks then rotate the legs all the way
around to the opposite angle. Do this for all three legs then
turn your tripod upside down.
