8
Step 3: Lake Assembly & Positioning
Begin by positioning the end of a straight
Extreme Turbo Chute section in the water at
a depth of 24 inches or more and at least 10
feet from shore. This will be the end of your
slide. If one section isn’t long enough to
reach the shore, attach additional sections until the slide reaches the
shore. Use the staking loops to attach anchor lines and anchor
weights to help prevent movement in windy conditions.
Attach each straight Extreme Turbo Chute
section so that the warning label is
positioned on the lead (uphill) end of the
slide. Ensure all Velcro
®
strips are securely
fastened together and there is a smooth
transition from section to section without
gaps.
For Extreme Turbo Chute sections that are on solid ground, ensure
that each section is properly staked down using the provided stakes
and straps that are attached to each section. Straps should be staked
45 degrees uphill to prevent downhill movement of the Extreme Turbo
Chute during use.
The Inflatable Start Ramps should be at the top of the hill and the last
section to be attached to the slide and staked down.
All manuals and user guides at all-guides.com
