14
Attach the jumping mat
Lay the jumping mat inside the assembled frame with the
warning labels of the mat facing up. Attach the mat to the
frame by hooking one end of the spring to the V-ring on the
mat and the other end to the hole in the frame. Make sure that
the hooks on each end of the spring point down toward the
ground and are fully inserted into the frame.
Note: To ease the process, start by attaching a spring at one
point on the frame. Working in a clockwise direction, count the
appropriate number of holes and V rings until you are one
quarter around the frame. Attach a spring. Repeat until you
reach your starting point. Place one spring midway between
each existing spring around the entire jump. Repeat the
process until all springs are on the jump.
W A R N I N G
FAILURE TO PROPERLY INSTALL THE
SPRINGS CAN RESULT IN PERSONAL INJURY
OR DAMAGE TO THE AQUA JUMP.
Each V-ring on the jumping mat must be
attached to the frame by a spring. Each spring must be attached with
the hooks pointing down. Be sure the hook on each spring is pushed
securely into its hole on the frame.
!!
