9
To Deflate
•
Remove all of the plugs and place deflating straws into valves.
Troubleshooting
Air chamber(s) won’t hold air:
•
Check stem valves to ensure plugs are fully seated down into the
valve body.
•
Check for holes in bladder following the procedures in the
“Repair” section.
Cleaning and Storage
When the inflatable product is not being used, we recommend
that you store it in a covered, shaded area. This will help protect
it against ultraviolet (UV) rays and extend the life of the product.
Clean the inflatable completely with a mild soap and fresh water.
NEVER USE PETROLEUM BASED PRODUCTS OR SOLVENTS FOR
CLEANING.
Product should be completely dry and remain dry while stored.
Roll the product loosely and place in a vented storage bag or
container.
Store in a cool, dry location. Do not store product directly on
concrete surface. Place mothballs around stored inflatable to
keep mice and insects away.
Repairs
Additional repair patches can be purchased at www.ravesports.com.
For minor holes or tears:
Inflate the tube and locate the leak by spraying the tube with
soapy water. Bubbles will appear where there is a leak.
Determine the hole size and cut a circular patch ½ - 1 inch wider
than the hole.
Meijer.com
