USER MANUAL
– RCS
3
Table of contents
page
1. Introduction
4
2. Warnings & Safety measures
4
3. Parts in the RCS-Kit
5
4. Principles
6
4.1 How the hydrualic system works
6
4.2 The reference height
6
4.3 Accuracy
6
4.4 Recommendations to increase the accuracy
7
5. Overview of the parts
8
6. Before installation
10
6.1 Capacity of the forklift truck
10
6.2 Maximum pressure in the hydraulic system
10
6.3 Battery voltage
10
6.4 Make the system free of oil pressure
10
6.5 The condition of the mechanical parts of the fork-lift truck
11
7. System Setup
12
7.1 Installing the T-part
12
7.2 Mounting the sensor
14
7.3 Position of the indicator
15
7.4 Installing the indicator and the indicator bracket
15
7.5 Mounting the sensor cable
16
7.6 Connecting the systems wiring
17
7.7 Remove any air from the hydraulic system
18
7.8 Placing stickers, marking the reference altitude
18
7.9 Placing the machine sticker on the indicator
19
7.10 Replacing the batteries of the indicator (before 2013)
20
7.11 Replacing the batteries of the indicator (2013)
21
7.12 Changing the batteries of the indicator (after XX/XX/2014)
22
8. Settings
23
8.1 Determine the capacity of the truck
23
8.2 Interval setting
23
8.3 Change the delay-time
26
8.4 Parameter settings
27
9. Calibration
29
9.1 Preparing for calibration
29
9.2 Correcting the zero point
30
9.3 Weight calibration (single point)
32
9.4 Weight calibration (multiple points)
35
10. Bringing the system into service
38
10.1. Turning the system on or off
38
10.2 Using the reference height
38
10.3 How can I weigh as accurately as possible?
38
10.4 The indicator
39
10.5 The touch panel
40
11. The Functions of the RCS-System
41
11.1 Correct Zero point
41
11.2 Gross weighing
42
11.3 Net weighing: automatic tare
43
11.4 Net weighing: manual tare entry
44
11.5 Totaling
47
12. Options
48
12.1 Power supply by the trucks battery
48
12.2 Printer (option)
51
