USER MANUAL
–
RCS Hy-Q-52
27
7. Enter the correct hour.
7.2 Changing the accuracy mode
1. Press ‘Weighing mode’.
2. Select ‘Accurate’ and press ‘Enter’.
8. Change the cursor to the next value by pressing
on the ‘.’
When you are finished, press ‘Enter’.
Default the system is set to ‘Easy’ mode. This will open up the speed window of your
measurements, and makes it possible to lift and lower faster.
If you need to perform a lot of weighing cycles and wish to have the weighing actions shorter
you can leave the Weighing mode on ‘easy’.
Note: This may cause the system to be slightly less accurate. If a higher accuracy is needed
you can set it to ‘Accurate’.
