Ravas iJack-40, Owner'S Manual

Page: 22 / 34

www.ravas.com
22
Relay (Option)
CHANGE TIME AND DATE ON THE PRINTOUT
If the weighing system has been equipped with a printer, and an option board, the
date and time can be printed together with the weight information.

Press the key for 6 seconds.

The display will show “ho_00” or the previous hour time setting, with the right
digit flashing.

To accept the old value press ENTER (

).

Or

Press the

key to go up a value or press the

key to go down a value until the
required value is reached.

Press

to change to the next digit and use the

or

key to change the value until
the required value is reached.

To accept the new value press ENTER (

).

The display will show “m_00” or the previous minute time setting, with the right
digit flashing.

Repeat the above procedure to accept or change the minute setting.

The display will show “dA_00” or the previous date of the month setting, with
the right digit flashing.

Repeat the above procedure to accept or change the date of the month setting.

The display will show “m_00” or the previous month setting, with the right digit
flashing.

Repeat the above procedure to accept or change the month setting.

The display will show “YE_00” or the previous year setting, with the right digit
flashing.

Repeat the above procedure to accept or change the year setting.

The indicator will return to normal weighing mode.
6. RELAY (Option)
If this option is used, it is no longer possible to use the piece-counting mode. The
setting of the set-points for the relay is done with the same key as is used for
sampling or entering a piece weight.
Relay technical specifications: Type: Zettler AZ833-12DE
Coil voltage: 12VDC
Switched capacity: max. 30VDC/2A
The choice of relay application is made when the system is ordered and the program
is selected in the parameter menu. The instructions for use depend on the application
chosen.
Four different applications are possible; 1 – overload check gross weight
2 – overload check net weight
3 – dosing/filling with manual tare & start
4 – dosing/filling with auto tare & start
OVERLOAD CHECK Gross Weight / Net Weight