7
11.
Never touch the iron hot shoe when it is turned on!
12.
Pour only water into the reservoir. It is recommended to use distilled water to prevent scale formation
on the inner parts of the iron.
13.
Do not add any chemicals to the water poured into the reservoir – they may damage the appliance.
14.
Do not touch hot metal parts, hot water, or steam to avoid burns.
15.
Before cleaning, unplug from the mains. Do not immerse in water!
16.
Store and transport in a package protecting against dust, moisture and mechanical damages.
17.
The iron must be used and put away on a stable surface.
18.
Despite proper use of the device and following all safety guidelines, some specific residual risks cannot
be completely eliminated.
TECHNICAL PARAMETERS
Model
ZP-7010N/ B
Voltage
220 – 240 V
Frequency
50/60 Hz
Rated power
1800 - 2200 W
CONSTRUCTION
1.
Handle cover
2.
Burst of steam button
3.
Spray button
4.
Steam level controller
5.
Water inlet
6.
Spray nozzle
7.
Soleplate
8.
Self-clean button
9.
Temperature knob
10.
Plastic skirt
11.
Water tank
12.
Handle
13.
Pilot light
14.
Cord protection
PURPOSE
The appliance is intended for home use only.
BEFORE FIRST USING
WARNING: Before turning the device on, check whether the voltage in the electric power network reflects
the parameters of the device specified on its rating plate. This iron is equipped with a grounded type plug
and must be plugged into a grounded type outlet.
Make sure that the hot shoe and water reservoir are clean; remove all labels from the hot shoe.
Make sure that the power lead is not damaged.
WARNING:
When ironing, mind sharp and metal elements of clothing – they may scratch the hot shoe.
The appliance should be put on a flat, heat-resistant surface. Once the dial is turned, the appliance immediately
begins to work, which is indicated by the turned-on control lamp.
When turning the appliance on for the first time, turn the dial to the ‘MAX’ position.
