Ravanson WT-1045S, User Manual

Page: 9 / 37

Do not plug the device in unless it is fully assembled.
Do not use the device with a broken or damaged blades.
Do not remove any parts of the housing.
Do not use the device in the immediate vicinity of a bathtub, shower
or swimming pool.
Prevent the cord and plug from any contact with water or moisture.
Do not spray any liquid on the device.
Unplug the device holding the plug; do not pull the cord.
Unplug the device if it is to be moved or is not going to be used for a
longer time.
Do not use the device with the protection grid removed.
Transport in an original package protecting from mechanical damages.
The appliance must be repaired by a qualified person using only
original spare parts.
Despite operating the unit in accordance with its intended use and in
accordance with all safety guidelines, it is impossible to eliminate all
residual risk factors.
The appliance is intended for home use only.
The appliance should only be used for private use, as intended for the
appliance. This appliance is not intended for commercial use.
Before assembly and disassembly of the sieve, always make sure that
the juicer is disconnected from its power source.
Do not cover the fan protection grid.
Do not put anything into the protection grid when the fan is on.
NOTE! The device is not designed to work with external timers or a
separate remote control system.
It is recommended to connect the device to the power supply network
equipped with a residual current device (RCD) with a switch-off current
of 30mA or less.