to be fulfilled.
35.
CAUTION
–Prevent the supply cord touch the enclosure
of heater.
36.
Check exterior walls for areas of damage before installing
the heater.
37.
Check exterior walls for communication and electrical
cables and pipelines. Should any service lines be present in
the immediate vicinity do not install your heater, find an
alternative location to install this product.
38.
Always use on a dry, suitably strong, stable, flat and level
surface.
39.
Do not position directly above or below an electrical
socket.
40.
Do not remove any of the warning stickers or signs from
the product.
ASSEMBLY
Unpack the heater making sure that all the items present and there are no components left
in the box and that the heater head is free from any packing material.
Using
the
detailed
drawing
follow
the
steps
to
assemble
your
heater.
Do
not
connect
the
heater
to
the
power
supply
until
all
the
assembly
is
complete.
Do
not
connect
the
heater
to
the
power
supply
if
any
of
the
components
or
the
power
cable
is
damaged
in
any
way. If
in
doubt
contact
your
supplier.
STEP 1
Screw out 8pcs M6*30mm in the cover and weight.
Fix the weight to the ground by 3pcs plastic anchors and 3pcs M4*50mm screws.
