When cold water enters the air, the result is a mixture of air and water particles. This change requires a higher
temperature which is why energy or latent heat are taken from water particles that lower the existing air
temperature.
Thanks to this function, it is possible also to remove any dust, pollen and other pollutants, ensuring cool, fresh
and clean air.
A stronger cooling effect can be obtained by using freezer packs.
The packs should be filled with water in the amount marked on the packaging. Freeze the water (pack) in a
household refrigerator and then insert it in cold water in the device tank.
It is also possible to add ice cubes into the device water tank.
OPERATING INSTRUCTIONS
Start-up
ATTENTION!
Make sure that the power source to which the appliance is to be connected is accordant with the parameters
specified on the rating plate.
Attention!
Before every use, inspect the device for any signs of mechanical damage. Inspect the power cord. If the power
cord is damaged, do not plug the device in.
Attention: cut the power when you pour the water into the tank.
OPERATION
Put plug in the socket, Power indicator light reminding this products in standby mode. Turn on "
” button
,default setting is in middel speed, Turn it again, products in standby .
1. Speed key
: Press this key, automatically starting from mid ,high ,low
2. Mode key “
”,default setting is in normal wind. Press this key, automatically setting from normal wind,
natural wind, sleep wind
3.Swing key
: press this key, the wind direction can swing flatly, and the swing indicator light is on. Press
again to cancel the function
Swing the blades transversely by your hands, choosing the wind direction up an down.
4.
Timer key
: press this key, the timer from 0 to 8 hours, each pressing 1hour.
5. Cooling key
: press this key, start this function, and if you add the freezing ice crystal box in the water
tank,air blow out temperature will much more cooling. It cancels this function when you press again.(make
sure water level is above min.line)
6. Humidification
:press this key, it only can start cool air under low air speed(make sure water level is
above min.line)
7. Anion key
: Press it to make the room air fresh, if no need this function ,press it again .
THE USE OF REMOTE CONTROL
Same operation for remote control
