INSTRUCTION MANUAL
RAV TD8060TWS - RAV TD8060TWSR
RAV TD8080TWS - RAV TD8080TWSR
Code M0230 - rev.1.1
(01/2014)
RAVAGLIOLI S.p.A.
RAVAGLIOLI S.p.A.
– 40044 Pontecchio Marconi (BO) Via I Maggio, 3
Page 31/ 64
Tel. (+39) 051/ 67.81.511 – Fax (+39) 051/ 84.64.67
8.9 Preparing for adjustment
By selecting front axle or total adjustment on test page (see para. 8.8 page 30), preparation for
adjustment will have to be made. Follow the sight instructions that appear on the screen to
perform the adjustment preparation operations.
Figure 35
8.10 Rear axle adjustment
The rear axle adjustment procedure is performed by selecting "Total adjustment" on the test page
(see para. 8.8 page 30), and after performing adjustment preparation operations (see para. 8.9
page 31).
Perform adjustments in the following order:
•
Rear camber - Rear semi-toe in
Figure 36
SENS. KEYBOARD PC KEYBOARD
DESCRIPTION
Select measurement type
(by moving the red frame).
Change value display type.
Continue adjusting front
axle.
1. Position the steering
wheel straight.
2.
Block the steering
wheel with the special
tool and proceed
"Jack hold" function key
(adjustment with wheels
lifted)
Additional measurements
Rear camber
measurements
Rear semi-toe in
measurements
Thrust angle
measurement
Measurement
selection red frame