INSTRUCTION MANUAL
RAV TD8060TWS - RAV TD8060TWSR
RAV TD8080TWS - RAV TD8080TWSR
Code M0230 - rev.1.1
(01/2014)
RAVAGLIOLI S.p.A.
RAVAGLIOLI S.p.A.
– 40044 Pontecchio Marconi (BO) Via I Maggio, 3
Page 3/ 64
Tel. (+39) 051/ 67.81.511 – Fax (+39) 051/ 84.64.67
The Bluetooth trademarks belong to their respective owners and are
used under licence by RAVAGLIOLI S.p.A.
0 WARNINGS
Any damage caused by failure to observe the indications in this manual or by incorrect
machine use shall exempt Ravaglioli S.p.A. from all liability.
0.1 Preliminary safety information
Before starting up the appliance:
•
Read the instructions and the entire manual before using or working on the wheel aligner.
This manual is an integral part of the product. Its aim is to provide the user with
instructions on how to operate the wheel aligner RAV TD8060TWS/TWSR and RAV
TD8080TWS/TWSR. Look after the manual for the entire working life of the machine and
keep it in a place that is known and easily accessible. Refer to it every time you have any
doubts. All product operators must be able to read the manual.
•
Make sure the power supply is in conformity with the specifications shown on the plate.
The plate showing voltage and frequency details is positioned on the rear of the appliance.
Please read this plate carefully. NEVER connect the appliance to a power source with
voltage or frequency different to those shown.
•
Adequately position the power cable of the wheel aligner. The machine features a 3-pin
plug with integrated ground. This can only be fitted in a socket that also has a ground
point. If it is not possible to fit the plug into this type of socket, contact an electrician. Do
not try modifying or using the plug incorrectly.
On switching off the machine:
•
Never switch off the PC inside the machine by disconnecting the plug or by means of the
PC switch itself. Always follow the procedure described in para. 4.2 on page 15. Incorrect
PC switch-off can "corrupt" the files inside the HARD-DISK.
•
The switch-off procedure described in para. 4.2 on page 15 does not affect the measuring
head recharging supports which therefore continue to be energised.
In emergency conditions and before any maintenance jobs:
•
Isolate the machine from any power sources by means of the master switch and
disconnect the plug from the power socket.
•
Do not try servicing the machine arbitrarily because the opening and removal of the doors
could expose you to hazardous voltages; maintenance jobs must only be performed by
authorised after-sales service personnel.
Working environment and cleaning the machine:
•
The working environment must be kept clean, dry and not exposed to atmospheric agents
and must be well lit.
•
Do not clean the machine with jets of water and compressed air.
•
To clean the plastic panels or shelves, use a damp cloth (avoid using liquids containing
solvents).
RAVAGLIOLI S.p.A. shall be entitled to make any changes to the models described in this manual
for technical or commercial reasons.