Page 12 of 37
INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
• Execute 4 holes with 12 mm diameter on the floor
by the holes on the bottom floor;
• insert the small blocks (excluded from supply) into
the holes;
• fix the machine to the ground with 4 M12x120 mm
screws (excluded from supply) (
Fig.
5 ref. 1
) (or
with 4 12x80 mm stud bolts (excluded from supply)).
Tighten the screws with an approximate tightening
torque of 70 Nm.
• Before clamping completely the machine to the floor,
level its rear part rotating the feet (
Fig.
6 ref. 1
).
1
Fig.
_
6
9.2
Fixtures contained in the packing
The packing case contains also the fixtures box.
Check that all the parts listed are there.
Code
Description
N.
B1157000
Two-faced cone
1
710013421
Reverse wheels protection
1
710012941
Entrainer pin extension
1
710090481
Pin protection
1
790011620
Bead sliding foil
1
790011640
Instructions for bead sliding
foil
1
710590840
Bead insertion belt kit
1
9.3
Assembly procedures
1. Assemble “Tubeless inflation” unit to the machine
keeping to the following instructions:
- fix the tank
(Fig.
_
7 ref.
_
6)
to the support flange
(Fig.
_
7 ref.
_
2)
using the screws
(Fig.
_
7 ref.
_
4)
and nuts
(Fig.
_
7 ref.
_
5)
equipped on issue;
- fix the flange
(Fig.
_
7 ref.
_
2)
to the machine
(Fig.
_
7
ref.
_
3)
using the screws
(Fig.
_
7 ref.
_
1)
;
1
2
3
4
4
5
5
6
Fig.
_
7
2. Connect the black pipe
(Fig.
_
8 ref.
_
1)
and the blue
pipe
(Fig.
_
8 ref.
_
2)
on the provided quick couplings
as shown in
Figure 8
.
1
2
Fig.
_
8
3. Mount the grease bucket holder ring (# 0223000)
(Fig.
_
9 ref.
_
1)
, in the fixture box, using the 2 screws
provided
(Fig.
_
9 ref.
_
2)
to the machine body
(Fig.
_
9
ref.
_
3)
.
G1180.30SLIM - G1180.30SLIMIT
7105-M002-10_R
RAVAGLIOLI S.p.A.
