raumplus RIMA FINO, Installation Instruction

Page: 3 / 16

3
System Information: Rima Fino (Korpusabmessungen)
120 kg
2100 mm / 2700 mm
600 mm / 800 mm
180 mm / 240 mm
PRODUCT INFORMATION
GENERAL INFORMATION:
Symbol Symbol Importance Importance
SYMBOLS:
Risk or danger
Advice and information
Additional information /
other documents
Directional data /
direction of movement
SYSTEM:
„yes“ and „right“
„no“ and „wrong“
Follow the order
Preparation
n
This manual is part of the product and describes the safe and proper installation
of the system. Please read the instructions carefully before installation.
n
Please note that the assembly should only be done by qualified and trained staff in
strict compliance with all details indicated in this document.
Improper installation in variation from manufacturer’s specification may cause defects
and danger, thus endangering the safe fixing of the product as well as the safety of
the prospective user. The liability of the manufacturer shall be excluded in case of
defects and consequential damages resulting from incorrect assembly of this product.
n
Please check the completeness of the delivered parts and check carefully if any
transport damages are visible.
n
If any parts are damaged or lost, please immediately contact the responsible supplier.
n
It is assumed that you have exactly identified all cutting dimensions according to
the measurement instruction for raumplus products.
Perform the production step
with two persons
Glue the connection
n
max. total weight =
n
min. / max. height =
n
min. / max. width =
n
min. / max. depth =
(corpus dimensions)