3
SYSTEM:
SYMBOLE:
Symbol
=
=
=
=
System Information:
500 mm / 1200 mm
470 mm
500 mm
521 mm
PRODUCT INFORMATION
GENERAL INFORMATION:
Importance
Risk or danger!
Advice and information
„yes“ and „right“
„no“ and „wrong“
Follow the order
Preparation
n
This manual is part of the product and describes the safe and proper installation
of the system. Please read the instructions carefully before installation
n
Please note that the assembly should only be done by qualified and trained staff in
strict compliance with all details indicated in this document. Improper installation in
variation from manufacturer’s specification may cause defects and danger, thus
endangering the safe fixing of the product as well as the safety of the prospective
user. The liability of the manufacturer shall be excluded in case of defects
and consequential damages resulting from incorrect assembly of this product.
n
Please check the completeness of the delivered parts and check carefully if any
transport damages are visible.
n
If any parts are damaged or lost, please immediately contact the responsible supplier.
n
It is assumed that you have exactly identified all cutting dimensions according to
the measurement instruction for
raumplus
products.
Directional data /
direction of movement
Additional information /
other documents
n
min./ max. Cabinet shelf width
n
fixed depth
n
Uno shelf depth min.
n
Cornice shelf depth min
Trouser pull out
(with front facing 25 mm)
