Rauch TWS 85.1, Instruction Manual

Page: 47 / 104

Commissioning
41
6
6.6.1 Ball coupling
1. Start the tractor.

Checking:
-
the PTO shaft is switched off.
- the hydraulic system is switched off.
- the holding-down clamp of the ball coupling is open.
2. Move the tractor to the machine.

Make sure there is enough space between the tractor and the machine in
order to be able to connect the drives and control elements.
3. Apply the tractor hand brake.
4. Switch off the tractor motor. Remove the ignition key.
5. Attach the tractor coupling bracket to the ball coupling.
6. Close the holding-down clamp.
In this respect, please also refer to the instructions of the tractor manufacturer.
 The connection is secured.
 The machine has been attached to the tractor.
6.6.2 Pin coupling
1. Start the tractor.

Checking:
-
the PTO shaft is switched off.
- the hydraulic system is switched off.
- the pin coupling is open.
2. Move the tractor to the machine.

Make sure there is enough space between the tractor and the machine in
order to be able to connect the drives and control elements.
3. Apply the tractor hand brake.
4. Switch off the tractor motor. Remove the ignition key.
5. Insert the towing eye in the tractor ball coupling.
6. Close the coupling bolt.
In this respect, please also refer to the instructions of the tractor manufacturer.

The connection is secured.

The machine has been attached to the tractor.