Rauch K 51, Instruction Manual

Page: 48 / 64

Spreading work 8
42
8.2
Instructions for spreading operation as a manual spreader
The intended use of the machine includes compliance with the operating, main-
tenance, and service conditions in accordance with the manufacturer specifica-
tions.
Spreading operation therefore always includes preparation and
cleaning/maintenance .

Carry out spreading operations as described below.
n
WARNING
Risk of injury caused by spreading material
Ejected spreading material may lead to injuries.

Ensure that nobody is present in the hazard zone.
Preparation

Close metering slide
 Fill in the spreading material Page 28

Adjust the spreading width limiter Page 30
Spreading

Travel to the spreading location
 Open the slide and start spreading

Finish spreading and close the slide
 Discharge residual material Page 44
Cleaning/maintenance
 Open metering slide

Cleaning and maintenance Page 45