Rauch AXIS-M 30.2, Instruction Manual

Page: 70 / 148

Commissioning 7
62
Example of boundary spreading during normal fertilisation
(Serial equipment for TELIMAT and/or serial equipment for TELIMAT T 25):
Figure 7.14: Limited border spreading during normal fertilisation
During limited border spreading in normal fertilisation mode, almost no fertiliser
goes beyond the field boundary. Underfertilisation at the field boundary must be
accepted in this case.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters :
Type of fertiliser: KAS BASF
Application rate: 300 kg/ha
Working width: 24 m
Forward speed: 12 km/h

Mounting height: 50/50 (A = 50 cm, B = 50 cm)

Drop point: 6

Metering slide adjustment: 180 left, 150 right
1
1. Recommended application rate reduction of 20% on the limited border spreading side

Spreading disc type: S4

PTO speed: 540 rpm

TELIMAT settings: K12.5