Rauch AXIS-M 20.2 EMC, Instruction Manual

Page: 89 / 236

General commissioning (all machine types)
69
8
AXISAXIS
Example of limited border spreading during late fertilising
(Serial equipment for TELIMAT and/or special equipment for T25):
Figure 8.17: Limited border spreading during late fertilising
During limited border spreading in late fertilising, almost no fertiliser goes beyond
the field boundary. Underfertilisation at the field boundary must be accepted in
this case.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters :
Type of fertiliser: KAS BASF
Application rate: 150 kg/ha
Working width: 24 m
Forward speed: 12 km/h

Mounting height: 0/6 (A = 0 cm, B = 6 cm)

Drop point: 6.5

Metering slide adjustment: 90 left, 72 right
1
1. Recommended quantity reduction of 20% on boundary spreading side

Spreading disc type: S4

PTO speed: 540rpm

TELIMAT settings: K12.5