Rauch AXIS-M 20.2 EMC, Instruction Manual

Page: 219 / 236

General maintenance and repair (all types)
199
9
AXIS
AXIS
20.1
AXIS
9.4 Cleaning
We recommend cleaning the machine with a light jet of water immediately after
every use in order to maintain the value of your machine.
To facilitate cleaning, fold up the protective grids in the hopper (see chapter
9.3: Opening the protective grid in the hopper, page 197 ).
The following instructions must be observed for cleaning:

Clean the outlets and the area of the slide guide from below only.

Only clean oiled machines at washing points fitted with an oil separator.

When cleaning with high-pressure water, never aim the jet directly at warning
signs, electrical equipment, hydraulic components, and sliding bearings.
After cleaning, we recommend treating the dry machine, especially the coated
spreader vanes and stainless steel parts , with an environmentally friendly anti-
corrosion agent.
A suitable polishing kit can be ordered from authorised dealers for use in treating
rust spots.
9.5 Lubrication plan
Lubrication points Lubricant Description
Drive shaft Grease See operator’s manual of the manufacturer.
Metering slide, stop le-
ver Grease, oil Ensure smooth movement, and grease regularly.
Spreading disc hub Graphite grease Ensure smooth movement of pivot and sliding sur-
faces and grease regularly.
Upper and lower hitch
balls Grease Grease regularly.
Joints, bushes (agitator
drive) Grease, oil They are designed for dryness but can be slightly lu-
bricated.
Drop point adjustment,
adjustable floor Oil Ensure smooth movement and oil regularly from the
outer edge inward and from the base outward.