Rauch AXIS H EMC Series, Instruction Manual

Page: 49 / 132

Commissioning
43
7
7 Commissioning
7.1 Accepting the machine
When accepting the machine, please check the completeness of the delivery.
The standard equipment includes

1 mineral fertiliser spreader of the AXIS H EMC series

1 AXIS H EMC operator's manual

1 fertiliser chart (on paper or CD),

1 calibration kit comprising chute and calculator,

Lower link and upper link pins,

1 spreading disc set (according to order)

1 agitator

Protective grid in hopper

1 ISOBUS machine control unit
Please also check any optional equipment that you ordered.
Check for any shipping damage or missing parts. Have any transportation dam-
ages confirmed by the forwarding agent.
If in doubt, contact your salesperson or the manufacturer directly.
7.2 Tractor requirements
To ensure a safe and correct use of the machine of the AXIS H EMC series, the
tractor must meet the necessary mechanical, hydraulic, and electrical require-
ments.

Oil supply: max. 210 bar , single or double-acting valve (depending on equip-
ment)

Hydraulic performance depending on machine type: 45 - 65 l/min , constant
flow or load sensing system,

Free return min. internal diameter of 18 mm ,

Operating voltage: 12 V ,

Three-point linkage, category II (AXIS H 30.2 EMC).

Three-point linkage, category III (AXIS H 50.2 EMC).
NOTICE
When receiving the machine, check that all attached components are correctly
and securely tightened.
The right-hand spreading disc and left-hand spreading disc must be mounted
facing the direction of travel.