Rauch AXIS H 30.2 EMC, Instruction Manual

Page: 75 / 132

Commissioning
69
7
7.9.2 Running one pass
Layout:

Length of testing area: 60 to 70 m
Figure 7.21: Layout for one pass
Preparing one pass:

Choose a similar fertiliser from the fertiliser chart and adjust the spreader ac-
cordingly.

Set the mounting height of the machine as specified in the fertiliser chart.
Make sure that the mounting height includes the top edge of the trays.

Check the spreading elements (spreading discs, spreader vanes, outlet) for
correct functioning and completeness.

Place two collecting vessels one after another at a distance of 1 m in the over-
lap zones (between the tramlines) and one collecting vessel in the track (ac-
cording to
figure 7.21 ).
NOTICE
We recommend the layout plan up to a spreading width of 24 m . A layout plan
for greater working widths is attached to the PPS5 practise test kit.
1/2x 1/2x
x