Rauch AXENT Series, Operator'S Manual

Page: 95 / 170

Spreading operation
89
7
7.2 Closing the cover
The cover is important safety equipment for the safe operation of the machine;
see also “Function of safety equipment” on page 19 . You can not overload when
the cover is open.
The cover is equipped with a safety switch. The safety switch reports the open
or closed position of the cover to the machine control unit. When the cover is
open, all consumers controlled by the machine control unit stop (conveyor belt,
pre-metering slider, comb roller, hopper cover).
Figure 7.1: Closing the cover
[1] Handles
[2] Plastic clips
[3] Tieback
[4] Bolt
n
WARNING
Danger due to rotating parts
The machine control unit switches off the AXENT 100.1 large area
spreader functions only. The spreading material is ejected further
by means of the rotating spreading discs of the attached spreading
unit. This can cause injuries.
 Instruct everybody to leave the danger zone.
 Make sure to switch off the spreading unit functions before
any checks on the machine.
4
1
3
4
2
2