Rauch AXENT Series, Operator'S Manual

Page: 75 / 170

Commissioning
69
6
6.7 Attaching the spreading unit to the machine
6.7.1 Requirements

Dismantle the feeder mesh and the separating plate from the
machine outlet before attaching the LIME-PowerPack spreading unit.
See
“Dismantling the feeder mesh (LIME-PowerPack)”, page 70 .

The large area spreader is empty.

The large area spreader is coupled to the tractor.

The large area spreader and the tractor are secured against rolling away.

The cover is folded up.
The adjustment lever is required as a tool to dismantle and install certain parts
from and on the AXENT large area spreader. It can be found at the front of the
machine.
[1] Adjustment lever (left in
direction of travel, hose
storage place)
Figure 6.15: Position of the adjustment lever
1