General maintenance and servicing
9
120
9.2
Maintenance schedule
This maintenance schedule applies to vehicles subject to normal use. For particu-
larly high loads, reduce the maintenance intervals accordingly. This prevents
damage to the tractor, large area spreader and fertiliser spreader.
9.2.1
General maintenance schedule
9.2.2
Maintenance schedule for axles and brake system
9.2.3
Maintenance schedule for hydraulic system
NOTICE
Further information can be found in the operating manual for the tractor and
fertiliser spreader.
Components
Maintenance work
Maintenance schedule
Comment
Wear parts and screw
connections
Check regularly
Cleaning
Perform after each use
Towing eye / ball
coupling
Check for wear
Lubrication plan
Components
Maintenance work
Maintenance schedule
Comment
Brakes
Check function before driving
Check condition and function
annually.
By specialist
workshop
Brake lining
Every 1 000 operating hours, at
least quarterly: check for wear.
Replace brake lining if necessary
Air tank, brake system Drain daily
Wheels
Re-tighten the wheel nuts after the
first 50 km
After the first 50 operating hours
and every 100 hours: check the
bearing clearance of the wheel
hubs
Check the tyre pressure regularly
Summary of Contents for AXENT Series
