Checking (e.g., left side of machine)
u
Insert a lower link pin with a diameter of
28
mm
centrally into the metering opening.
Fig. 83: Lower link pin in metering opening
u
Push the metering slide against the pin and lock it in this position by tightening the setscrew.
The stop at the lower scale arc (metering scale) is at scale value 85.
u
If the position is not correct, readjust the scale.
9. Maintenance and service
114
5903360
AXENT 90.1
Summary of Contents for AXENT 90.1
Page 119: ...12 Appendix 12 Appendix AXENT 90 1 5903360 119...
Page 126: ......
