manualshive.com logo in svg

Rattler 369D, Owner'S Manual

Share
Download
Rattler 369D Owner'S Manual Download Page 37

34

©   2 0 0 3   d i r e c t e d   e l e c t r o n i c s ,   i n c .

go out indicating the change.

4.

R

Reelleeaassee. The Program switch can now

be released. 

You can advance from feature to feature by pressing and

releasing the Valet/Program switch the number of times neces-

sary to get from the feature you just programmed to the feature

you wish to access. For example, if you just programmed the run

time (Feature 3) and you next want to program parking lights

(Feature 4) to constant, release the Valet/Program switch. Press

and release it once to advance from Feature 3 to Feature 4. Then

press it once more and hold it. The LED will flash in groups of

4 to confirm that you have accessed Feature 4.

The learn routine will be exited if any of the following occurs:

➤

The ignition is turned on.

➤

The Valet/Program switch is pressed too many times.

➤

More than 25 seconds elapses between programming steps.

Summary of Contents for 369D
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands