20
© 2000 Directed Electronics, Inc. Vista, CA
starter kill harness (H3) wire connection guide
Use one of these wire as a starter kill input and the other as a starter kill output wire (these wires are inter-
changeable).
plug-in LED and valet/program switch
The LED and the Valet/Program switch both plug into the control module. The status LED plugs into the white
two-pin port, while the Valet
®
/Program switch should be plugged into the blue two-pin port. The status LED and
Valet
®
/Program switch each fit into
9
/
32
-inch holes.
Status LED
Valet
®
/Program Switch
H3/1 and H3/2 BLACK starter kill wires
