manualshive.com logo in svg

Ratoc Systems FR1SX, User Manual, Page: 6 / 64

Share
Download
Ratoc Systems FR1SX User Manual Download Page 6

3

           •The original SCSI based drivers or application software for your

              SCSI devices may not work with the SCSI device through the FR1SX.

           •FR1SX doesn’t support the following function:

                  -Multiple LUN(Logical Unit Number)

           •Some scanners may not work with the FR1SX. For more information,

             refer to our web site(www.ratocsytems.com/english).

           •You can’t boot up system from SCSI devices.

             (For Windows Users Only)

           •If you have a FireWire Embedded PowerMac or PowerBook, you

             can boot up from the SCSI device(HDD or Removable) through

             the FR1SX. Sometimes the Firmware update of PowerMac/

             PowerBook may be required. If it doesn’t work properly, please ask

             to www.apple.com.(For Mac Users Only)

     

  (NOTE) Apple Firmware doesn’t support boot up from

                           external CD-ROM through FireWire.

Summary of Contents for FR1SX

































































Reviews:

No comments