background image

EN 

 

 

Do not use any charger other than that specifi cally provided for use with the equipment. 

 

Do not use any battery which is not designed for use with the equipment. 

 

Always purchase the battery recommended by the device manufacturer for the equipment. 

 

Keep batteries clean and dry. 

Wipe the battery terminals with a clean dry cloth if they become dirty. 

 

Secondary  batteries  need  to  be  charged  before  each  use.  Always 
use  the  correct  charger  and  refer  to  the  manufacturer

’s  instructions 

or equipment manual for proper charging instructions. 

Do not leave a battery on prolonged charge when not in use. 

After extended periods of storage, it may be necessary to charge and 
discharge the batteries several times to obtain maximum performance. 
Retain the original product literature for future reference. 

Use the battery only in the application for which it was intended. 

When possible, remove the battery from the equipment when not in use. 

Dispose of properly. 

 

OPERATION 

 

WARNING!  Risk  of  electric  shock  and  short  circuiting.  Use 
approved  and  intact  wall  sockets.  Make  sure  that  the  cable  is  not 
damaged. Replace cable if it ap-pears to be damaged in any way. 

 

Connect the battery charger 

Connect the battery charger to the voltage and frequency 
specified on the rating plate. 

 

Put the electric plug in an earthed socket-outlet. The charging LED light lit 
green in the begin 5s, then the light will o

ff if no battery in the charger. 

Connect the battery to the battery charger 

 

The battery must be charged before using it the fi rst time. The 
battery is only 30% charged when delivered. 

 

NOTE! During charging monitoring the charging process and never leave the battery in the 

 

charger when charging is complete. 
Push the battery into the battery charger. 

 

 The charging LED light always flashes green when the battery is charging. 

 

 The charging LED light always light if the battery is fully charged. 

  

The battery will not be charged if the battery temperature is deviation. In that case the 

fault LED light flashes until the battery cool down to normal temperature. 

 

 

Summary of Contents for RBEI40








Reviews: