Part IV Wiring Diagram
20
3-4-3 Air filter
1)
Remove the fan guard decoration sheet first. When removing the fan guard decoration sheet, lift it up
and then pull it back.
2)
Remove the air filter housing cover.
3)
Remove the parts in turn from top to bottom.
4)
To remove the air filter seat assembly, you should first twist out the screw.
Be sure not to start the gasoline engine before the air filter is mounted, which will cause
the gasoline engine to wear out quickly.
3-4-4 Gasoline pump and carburetor
At high altitude areas, standardized carburetor will cause thick mixed gas, drop the output
power and increase the fuel consumption rate for the gasoline engine. Gasoline engine used at high altitude
area can be improved by assembling small-diameter main metering hole of the carburetor and re-adjusting
adjustment screw of idle mixing ratio. If you often use the gasoline engine at the region of above 1,000 m,
Bolt M6×35
Locking nut assembly of the air filter
Air filter housing cover
Air filter buckle
Air filter element (foam)
Air filter element (paper)
Air filter gasket
Air filter seat
assembly
Air intake pipe cover
Fan guard
decoration sheet
Locking handle
assembly
Screw
