ratiotec Soldi Smart Pro, Instruction Manual

Page: 6 / 72

Function Setting Explanation
HOLD ON or OFF
Banknote ejection with or without
holding on to it .
TONE ON or OFF Switch on or off acoustic signals .
LED ON or OFF
Switch on or off the frame light func-
tion .
ECO OFF, 15 , 30, 45, 60
The device turns off automatically after
a defined period of time without use .
(Ecomode)
BANKNOTE Arrows point to the front or the rear
Select the ejection of the detected
banknotes, false or suspect notes eject
against the selected direction .
LANGUAGE English , Deutsch, Francais, Italiano, Espanol The currently used language appears .
RESET Set to factory settings
Press ON/OFF for several seconds to
set all functions to factory settings .
(factory settings are highlighted as
fat
above)
Following functions can be activated or inactivated:
Special functions
Cleaning Message
In the event a cleaning is needed, the message CLEAN appears after switching on the device . The
frame lights up with red light . Turn not off the device for the cleaning process . Clean all sensors
by opening cover .
Low-power mode
If the device is unused, it automatically switches to Low-power Mode after 10 minutes . During this
mode only the arrows above the display are activated . After inserting a banknote to the feeder,
the Low-power mode is automatically switched off again .
Note: Use the ECO function to save even more energy .
6 6 7 7