Rational iCombi Pro 20-1/1, Original Installation Manual

Page: 8 / 56

1 | Introduction en
8 / 56 80.51.826_iCombi Pro-iCombi Classic_fGR SG _IM_V01_EU-west
1 Introduction
1.1 Information on this manual
This document is a preliminary version of
the installation manual. Please note the rel-
evant version and date.
This manual describes the assembly of the
mobile base frame for the free-standing
units:
n
LM1: iCombi Pro (iCP) 20-1/1 and
20-2/1
n
LM2: iCombi Classic (iCC) 20-1/1 and
20-2/1
This manual is to be used in addition to the
installation manual for iCombi Pro /
iCombi Classic. Read the manual before
assembly. The manual is there to ensure
that you use the units safely and install
them properly.
The illustrations in this manual are ex-
amples only and may differ from the as-
sembly kit.
All information from the installation
manual for iCombi Pro / iCombi Classic
apply accordingly.
2 Safety
2.1 General safety instructions
This unit is designed in such a way that it
presents no danger if installed according to
instructions. This manual describes how to
install the unit correctly.
n
Adhere to the relevant local regula-
tions and standards in your country.
n
Use carrying aids such as carrying
straps during transportation.
n
Secure the unit against tipping during
transport, after setting up at the in-
stallation location.
n
Wear appropriate protective clothing,
such as protective gloves and safety
gloves, when transporting and in-
stalling the unit.
n
The appliance must be installed in a
frost-resistant, non-windy and protec-
ted environment.
n
Do not expose the unit to weather
conditions such as rain.
n
Only connect the unit in accordance
with the installation manual and the in-
formation on the type plate.
n
Switch the unit off before disconnect-
ing the mains power or connecting to
the mains.
n
After use, only transport the unit at
ambient temperatures above 0°C
[32°F].
n
Only store the unit at ambient temper-
atures above 0°C [32°F].
n
Do not operate the unit without an air
filter.
2.2 Intended use
The mobile base frame is exclusively inten-
ded for use in large and commercial kit-
chens.
The mobile base frame enables the mobile
use of floor-mounted units.
3 Product description
This assembly kit is used to install the mo-
bile base frame for floor-mounted units.
The mobile base frame is only available for
floor-mounted units.
The mobile base frame enables the mobile
use of floor-mounted units. Subsequent
installation is possible.