4 | Installation
en
10 / 56
80.51.826_iCombi Pro-iCombi Classic_fGR SG _IM_V01_EU-west
unit. Observe the location and design
of the front brackets as they are differ-
ent [
Photo 05
].
>
The unit is fastened by hand on the
mobile base frame.
5. Apply the parking brake to all castors.
6. Open the cooking chamber door.
7. Carefully pull the unit downwards by
the open cooking chamber door
[
Photo 06
]. The unit tips forward.
8. Disassemble the rear feet
[
Photo 07
]. Use a plastic hammer
to disassemble the feet.
9. Carefully lift the unit upwards by the
cooking chamber door [
Photo 08
].
The unit tips backwards.
10. Disassemble the front feet
[
Photo 09
]. Use a plastic hammer
to hit out the feet.
11. Check if the unit now rests exactly on
the mobile base frame. If the unit does
not rest exactly on the base frame,
slightly loosen the screws. The unit
lowers due to its own weight.
12. Tighten the screws on the mobile base
frame at the front and rear
[
Photo 10
].
13. Close the front mounting holes with
the sealing plugs [
Photo 11
].
>>
The mobile base frame is properly in-
stalled. The cables [
Photo 12
]
placed on the cable support and the
media connections can now be con-
nected.
Summary of Contents for iCombi Classic 20-1/1
