36
TECHNICAL DATA
Type
PRO XF20-2 (CDI -designation of machinery, representative of Cordless Drill)
Battery voltage
20V
No load speed
0-450/0-1600/min
impact rate
0-7200/0-25600/min
clutch position
21+1+1
Max. torque
25/40 N.m (soft/hard)
Chuck capacity
13mm
Max. drilling
capacity
Wood
35mm
Steel
10mm
masonry
13mm
Battery capacity
2.0Ah Li-ion
Charging time
48min
Charger Input
100-240V~ 50/60Hz,78W
Charger Output
14.4--20V 3000mA
Machine weight
1.35kg
NOISE INFORMATION
A weighted sound pressure
L
pA
: 82 dB(A)
A weighted sound power
L
wA
: 93 dB(A)
K
PA
& K
WA
3.0 dB(A)
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841:
Impact drilling into concrete
Vibration emission value a
h,ID
= 9,397m/s²
Uncertainty K = 1.5 m/s²
Drilling into metal
Vibration emission value a
h,D
= 2,270m/s²
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a
preliminary assessment of exposure.
WARNING:
The vibration and noise emissions during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used especially what kind of
workpiece is processed dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration and noise accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
