Ratio AR36-2NM, Instructions Manual, Page: 38 / 44

38
Push Adjust Handle Lock Switch (3) onward and
hold it, adjust the Handle to desired position.
Release the switch and Adjust Handle Lock
Switch will recover itself, and then you can use
the machine.
D
E
5. SWITCH LOCK
The On/Off switch trigger can be locked in OFF
position. This helps to reduce the possibility of
accidental starting when not in use. To lock the
switch, place the forward and reverse rotation
selector in the center position by pushing it on
either side of the body.
6. USING THE SIGHT LIGHT
The sight light allows you to keep a clear view
under less illuminated circumstances. To turn on
the light simply press the on/off switch. When you
release the on/off switch, the light will be off.
7. ON/OFF SWITCH OF THE TORCH (SEE
FIG.F)
F
a
b
There is a torch in the end of the machine. The
torch produces a light beam that emerges from
the lamp head (1).
To start the torch, push the Swith (2) to “ON”
position.
To turn off, push the Swith (2) to “OFF” position.
8. DISPOSAL OF AN EXHAUSTED BATTERY
PACK
To preserve natural resources, please
recycle or dispose of the battery pack
properly. This battery pack contains Lithium
batteries. Consult your local waste authority for
information regarding available recycling and/
or disposal options. Discharge your battery pack
by operating your machine, then remove the
battery pack from the machine housing and cover
the battery pack connections with heavy-duty
adhesive tape to prevent short circuit and energy
discharge. Do not attempt to open or remove any
of the components.
9. OVERLOAD PROTECTION
When overloaded, the motor comes to a stop.
Relieve the load on the machine immediately
and allow cooling for approx. 30 seconds at the
highest no-load speed.
10. PROTECTION AGAINST DEEP
DISCHARGING
The Li-ion battery is protected against deep
discharging by the “Discharging Protection
System”. When the battery is empty, the machine
is switched off by means of a protective circuit:
The inserted tool no longer rotates.
MAINTENANCE
Your power tool requires no additional lubrication
or maintenance.
There are no user serviceable parts in your
power tool. Never use water or chemical cleaners
to clean your power tool. Wipe clean with a dry
cloth. Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep all
working controls free of dust. Occasionally you
may see sparks through the ventilation slots. This
is normal and will not damage your power tool.
ENVIRONMENTAL
PROTECTION
This product has been marked with a
symbol relating to removing electric and
electronic waste. This means that this
product shall not be discarded with household
waste but that it shall be returned to a collection
system which conforms to the European Directive
2002/96/CE. It will then be recycled or dismantled
in order to reduce the impact on the environment.