5
I N S T A L L A T I O N H O M E B O X
1.
The installation must be done by a qualified and licenced electrician
according the local legislation.
2.
The electrical installation must be free of power during the entire
installation period.
3.
Since this Charging Unit uses circuits that reference to ground, no
Megging must be done after connecting to power.
4.
Wiring and protection:
Version
Wiring *
Mains Circuit Breaker
(MCB)
Residual Current Device
(RCD)
32A / 1 Phase
3G6,00mm
2
40A B/C-Characteristic
30mA, Type A
32A / 3 Phase
5G6,00mm
2
40A C-Characteristic
30mA, Type A
*
For cable length upto 25m
PLEASE NOTE:
5.
Open bottom cover of the Charge Station
(5 screws – see picture). Carefully brake out
required cable opening for incoming power cable
and charge cable.
power cable from the back. Use supplied M25
6.
Use 4 wood screws M4,5x35mm to mount Charging Station on the wall.
The Charging Station should be installed between 0,80m and 1,20m from
bottom to the ground.
The Charging Station does not include the
MCB or RCD. These must be installed
separately in the electrical cabinet.
HOME BOX SMART / Version: EV035
