12
iX3M in CCR mode
Activate the CCR mode
In order to use the iX3M with a Rebreather activate the CCR mode.
Browse for CCR SETTINGS and set CCR Mode = ON
Refer to the main iX3M manual in order to use the iX3M in CCR mode without using
the Sensor Board.
The main manual of the iX3M is available at this link:
http://www.ratio-computers.com/support
To reach this menu from the main
screen press in sequence:
CCR settings
ccr mode:
setpoint low:
depth 1:
setpoint med:
depth 2:
setpoint high:
setpoint mode:
b
A
C
D
exit
next
VALUe
+
_
off
0.70
20 m
1.00
50 m
1.40
AUto
A
b
D D
