background image

11

Danger Warning 

The computer IS NOT meant for a PROFESSIONAL use.
The computer is meant exclusively for a sport, recreational or technical use.

• A use which is not compliant to what has been said above, could expose the diver to an increasing risk of incurring in the 

Decompression Sickness (DCS). For this reason we discourage its use in case of professional or commercial dives, unless it is 
used as an operator’s further support device.

• Before diving it is necessary to check the battery autonomy. DO NOT dive if the battery level is at 30% or at lower 

percentages; make sure that the screen doesn’t show malfunctioning signs. It must be read clearly. 

• Check always that settings are the ones desired. Don’t let the computer be manipulated by someone else before diving. In 

this case, check that settings are the ones you desire.

• Consider that our body experience changes everyday. The computer cannot take into consideration all these changes. If 

you don’t feel at your best physical conditions or if you feel physical problems, don’t dive.

• Avoid all behaviours increasing the risks connected to the DD such as rapid ascents, yo-yo dives, violation of compulsory 

decompressive stops, dives with too close surface intervals and any behaviour which is contrary to the common sense and 
to the training received.
 

• This device doesn’t allow its use without having the due skill, given by a specific training. 

The failure to comply with the basic rules of diving exposes the diver at death danger. 

Summary of Contents for iXM3




































































Reviews: