Page 5
Turning Location Message OFF:
1.
Press the
ON/OFF
button (phone should give a dial tone)
2.
Slide the S15 switch down into “ON/PROGRAM” position
3.
Press
7, *, 0
4.
Slide the S15 switch back up into “1” position
5.
Press the
ON/OFF
button to turn the phone off
Note:
The answering party can replay the message anytime by pressing
*, *
.
Resetting the Phone:
The phone can be reset by performing the following steps:
1.
Press the
ON/OFF
button (phone should give a dial tone)
2.
Slide the S15 switch down into “ON/PROGRAM” position
3.
Press
9, *, 7, 2, 8, 4
4.
Press
5, *, 1
5.
Slide the S15 switch back up into “1” position
6.
Press the
ON/OFF
button to turn the phone off
Note:
Resetting the phone will not clear out any programmed numbers or messages.
Programming Talk Timer:
Talk Time is the amount of time that two-way communication will occur after a call is answered. When Talk Time
expires, the phone will hang up and the button on the phone will need to be pushed again to re-establish a call.
1.
Press the
ON/OFF
button (phone should give a dial tone)
2.
Slide the S15 switch down into “ON/PROGRAM” position
3.
Press
6, *,
3 digit number in minutes (3 minutes = 003, 20 minutes = 020)
4.
Slide the S15 switch back up into “1” position
5.
Press the
ON/OFF
button to turn the phone off
Note:
The lowest Talk Time can be set to is 1 minute. The longest is 999 minutes.
Programming Auto Answer:
Auto Answer allows the 2400 Series phone to answer if called without someone needing to push the call button.
This feature is required by code. By default, all 2400 Series phones are manufactured with Auto Answer enabled.
This feature should only be turned off in a home or private elevator application.
1.
Press the
ON/OFF
button (phone should give a dial tone)
2.
Slide the S15 switch down into “ON/PROGRAM” position
3.
Press
8, *, 1 or 2
(1 is ON, 2 is OFF)
4.
Slide the S15 switch back up into “1” position
5.
Press the
ON/OFF
button to turn the phone off
Volume Adjustment:
If the voice of the person you call is not loud enough in the phone speaker, increase the volume by pressing the
ON/OFF
button. When the phone has dial tone, press the blue
VOL
button. Each time you push the VOL button,
the volume will go up or down one level. 2400 Series phones have three volume levels: high, medium, and low.
When desired volume level is reached, push the
ON/OFF
button to save the change.
